document number: 93714 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 02-feb-11 1 phase control thyristors (hockey puk version), 1473 a st1000c..k series vishay semiconductors features ? center amplifying gate ? metal case with ceramic insulator ? international standa rd case a-24 (k-puk) ? high profile hockey puk ? compliant to rohs directive 2002/95/ec typical applications ? dc motor controls ? controlled dc power supplies ? ac controllers electrical specifications product summary i t(av) 1473 a a-24 (k-puk) major ratings and characteristics parameter test conditions values units i t(av) 1473 a t hs 55 c i t(rms) 2913 a t hs 25 c i tsm 50 hz 20.0 a 60 hz 21.2 i 2 t 50 hz 2000 ka 2 s 60 hz 1865 i 2 ? t 20 000 ka 2 ? s v drm /v rrm range 1200 to 2600 v t q typical 300 s t j range - 40 to 125 c voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm maximum at t j = 125 c ma st1000c..k 12 1200 1300 100 16 1600 1700 18 1800 1900 20 2000 2100 22 2200 2300 24 2400 2500 26 2600 2700 www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 93714 2 revision: 02-feb-11 st1000c..k series vishay semiconductors phase control thyristors (hockey puk version), 1473 a absolute maximum ratings parameter symbol test conditions values units maximum average on-state current at heatsink temperature i t(av) 180 conduction, half sine wave double side (single side) cooled 1473 (630) a 55 (85) c maximum rms on-state current i t(rms) dc at 25 c heatsink temper ature double si de cooled 6540 a maximum peak, one-cycle, non-repetitive surge current i tsm t = 10 ms no voltage reapplied sinusoidal half wave, initial t j = t j maximum 20.0 ka t = 8.3 ms 21.2 t = 10 ms 100 % v rrm reapplied 17.0 t = 8.3 ms 18.1 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 2000 ka 2 s t = 8.3 ms 1865 t = 10 ms 100 % v rrm reapplied 1445 t = 8.3 ms 1360 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 20 000 ka 2 ? s low level value of threshold voltage v t(to)1 (16.7 % x ? x i t(av) < i < ? x i t(av) ), t j = t j maximum 0.950 v high level value of threshold voltage v t(to)2 (i > ? x i t(av) ), t j = t j maximum 1.024 low level value of on-state slope resistance r t1 (16.7 % x ? x i t(av) < i < ? x i t(av) ), t j = t j maximum 0.283 m ? high level value of on-state slope resistance r t2 (i > ? x i t(av) ), t j = t j maximum 0.265 maximum on-state voltage drop v tm i pk = 3000 a, t j = 125 c, t p = 10 ms sine pulse 1.80 v maximum holding current i h t j = 25 c, anode supply 12 v resistive load 600 ma typical latching current i l 1000 switching parameter symbol test co nditions values units maximum non-repe titive rate of rise of turned-on current di/dt gate drive 20 v, 20 ? , t r ? 1 s t j = t j maximum, anode voltage ? 80 % v drm 1000 a/s typical delay time t d gate current 1 a, di g /dt = 1 a/s v d = 0.67 % v drm , t j = 25 c 1.9 s typical turn-off time t q i tm = 550 a, t j = t j maximum, di/dt = 40 a/s, v r = 50 v, dv/dt = 20 v/s, gate 0 v 100 ? , t p = 500 s 300 blocking parameter symbol test conditions values units maximum critical rate of rise of off-state voltage dv/dt t j = t j maximum linear to 80 % rated v drm 500 v/s maximum peak reverse and off-state leakage current i rrm , i drm t j = t j maximum, rated v drm /v rrm applied 100 ma www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 93714 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 02-feb-11 3 st1000c..k series phase control thyristors (hockey puk version), 1473 a vishay semiconductors note ? the table above shows the increment of thermal resistance r thjc when devices operate at different conduction angles than dc triggering parameter symbol test conditions values units typ. max. maximum peak gate power p gm t j = t j maximum, t p ? 5 ms 16 w maximum peak average gate power p g(av) t j = t j maximum, f = 50 hz, d% = 50 3 maximum peak positi ve gate current i gm t j = t j maximum, t p ? 5 ms 3.0 a maximum peak positive gate voltage + v gm 20 v maximum peak negative gate voltage - v gm 5.0 dc gate current required to trigger i gt t j = - 40 c maximum required gate trigger/ current/voltage are the lowest value which will trigger all units 12 v anode to cathode applied 200 - ma t j = 25 c 100 200 t j = 125 c 50 - dc gate voltage required to trigger v gt t j = - 40 c 1.4 - v t j = 25 c 1.1 3.0 t j = 125 c 0.9 - dc gate current not to trigger i gd t j = t j maximum maximum gate cu rrent/voltage not to trigger is the maximum value which will not trigger any unit with rated v drm anode to cathode applied 10 ma dc gate voltage not to trigger v gd 0.25 v thermal and mechanical specifications parameter symbol test conditions values units maximum operating temperature range t j - 40 to 125 c maximum storage temperature range t stg - 40 to 150 maximum thermal resistance, junction to heatsink r thj-hs dc operation single side cooled 0.042 k/w dc operation double side cooled 0.021 maximum thermal resistance, case to heatsink r thc-hs dc operation single side cooled 0.006 dc operation double side cooled 0.003 mounting force, 10 % 24 500 (2500) n (kg) approximate weight 425 g case style see dimensions - link at the end of datasheet a-24 (k-puk) ? r thjc conduction conduction angle sinusoidal conduction rectangular conduction test conditions units single side double side single side double side 180 0.003 0.003 0.002 0.002 t j = t j maximum k/w 120 0.004 0.004 0.004 0.004 90 0.005 0.005 0.005 0.005 60 0.007 0.007 0.007 0.007 30 0.012 0.012 0.012 0.012 www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 93714 4 revision: 02-feb-11 st1000c..k series vishay semiconductors phase control thyristors (hockey puk version), 1473 a fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - current ratings characteristics fig. 4 - current ratings characteristics fig. 5 - on-state po wer loss characteristics fig. 6 - on-state po wer loss characteristics average on-state current (a) maximum allowable heatsink temperature (c) 70 80 90 100 110 120 130 0 100 200 300 400 500 600 700 30 60 90 120 180 conduction angle st1000c..k series (single side cooled ) r (dc) = 0.042 k/w thj-hs average on-state current (a) maximum allowable heatsink temperature ( c) 70 80 90 100 110 120 130 0 200 400 600 800 1000 dc 30 60 90 120 180 conduction period st1000c..k series (single side cooled) r (dc) = 0.042 k/w thj-hs average on-state current (a) maximum allowable heatsink temperature (c) 40 50 60 70 80 90 100 110 120 130 0 400 800 1200 1600 30? 60? 90? 120? 180? conduction angle st1000c..k series (double side cooled) r (dc) = 0.021 k/w thj-hs average on-state current (a) maximum allowable heatsink temperature (c) 40 50 60 70 80 90 100 110 120 130 0 400 800 1200 1600 2000 2400 dc 30? 60? 90? 120? 180? conduction period st1000c..k series (double side cooled) r (dc) = 0.021 k/w thj-hs average on-state current (a) maximum average on-state power loss (w) 0 500 1000 1500 2000 2500 3000 0 400 800 1200 1600 rms limit conduction angle 180? 120? 90? 60? 30? st1000c..k series t = 125?c j average on-state current (a) maximum average on-state power loss (w) 0 500 1000 1500 2000 2500 3000 3500 4000 0 500 1000 1500 2000 2500 dc 180? 120? 90? 60? 30? rms limit conduction period st1000c..k series t = 125?c j www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 93714 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 02-feb-11 5 st1000c..k series phase control thyristors (hockey puk version), 1473 a vishay semiconductors fig. 7 - maximum non- repetitive surge current single and double side cooled fig. 8 - maximum non-re petitive surge current single and double side cooled fig. 9 - on-state volt age drop characteristics fig. 10 - ther mal impedance z thj-hs characteristics number of equal amplitude half cycle current pulses (n) peak half sine wave on-state current (a) 6000 8000 10000 12000 14000 16000 18000 110100 st1000c..k series initial t = 125?c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j at any rated load condition and with rated v applied following surge. rrm pulse train duration (s) peak half sine wave on-state current (a) 6000 8000 10000 12000 14000 16000 18000 20000 22000 0.01 0.1 1 maximum non repetitive surge current versus pulse train duration. control of conduction may not be maintained. st1000c..k series initial t = 125?c no voltage reapplied rated v reapplied rrm j instantaneous on-state voltage (v) instantaneous on-state current (a) 100 1000 10000 0.5 1 1.5 2 2.5 3 3.5 4 t = 25?c j st1000c..k series t = 125?c j square wave pulse duration (s) transient thermal impedance z thj-hs (k/w) 0.001 0.01 0.1 0.001 0.01 0.1 1 10 100 steady state value r = 0.42 k/w (single side cooled) r = 0.21 k/w (double side cooled) (dc operation) st1000c..k series thj-hs thj-hs www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 93714 6 revision: 02-feb-11 st1000c..k series vishay semiconductors phase control thyristors (hockey puk version), 1473 a fig. 11 - gate characteristics ordering information table links to related documents dimensions www.vishay.com/doc?95081 instantaneous gate current (a) instantaneous gate voltage (v) 0.1 1 10 100 0.001 0.01 0.1 1 10 100 vgd igd (b) (a) tj=25 ? c tj=125 ?c tj=-40 ?c (1) (2) (3) a) recommended load line for b) recommended load line for <=30% rated di/dt : 10v, 10ohms frequency limited by pg(av) rated di/dt : 20v, 10ohms; tr<=1 s tr<=1 s rectangular gate pulse (1) pgm = 16w, tp = 4ms (2) pgm = 30w, tp = 2ms (3) pgm = 60w, tp = 1ms device: st100c..k series 1 - thyristor 2 - essential part number 3 - 0 = converter grade 4 - c = ceramic puk 8 - critical dv/dt: 5 - voltage code x 100 = v rrm (see voltage ratings table) 6 - k = puk case a-24 (k-puk) 7 - 0 = eyelet terminals (gate and auxiliary cathode unsoldered leads) 1 = fast-on terminals (gate and auxiliary cathode unsoldered leads) 2 = eyelet terminals (gate and auxiliary cathode soldered leads) 3 = fast-on terminals (gate and auxiliary cathode soldered leads) none = 500 v/s (standard selection) l = 1000 v/s (special selection) device code 5 13 24 678 st 100 0 c 26 k 1 - www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 95081 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 02-aug-07 1 a-24 (k-puk) outline dimensions vishay semiconductors dimensions in millimeters (inches) 74.5 (2.9) dia. max. 2 holes dia. 3.5 (0.14) x 2.1 (0.1) deep 4.75 (0.2) nom. 44 (1.73) creepage distance: 28.88 (1.137) minimum strike distance: 17.99 (0.708) minimum quote between upper and lower pole pieces has to be considered after application of mounting force (see thermal and mechanical specification) 20 5 pin receptable amp. 60598-1 1 (0.04) min. 2 places 47.5 (1.87) dia. max. 2 places 27.5 (1.08) max. 67 (2.6) dia. max. www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. www.datasheet.co.kr datasheet pdf - http://www..net/
|
